Parts used for mounting the track. These will include the track parts themselves, straight and curved sections, as well as the various parts needed for different uses. You will find track brackets, bumpers, gliders, trollies, hanger assemblies as well as track joints in this section.
1) TRACKPart #RP-015G
1000 lbs capacity. Runways are painted blue. Lengths are custom and can be continuous up to 23 feet. Lengths longer then 23 feet require splice joint hardware. (Not included: hangers, festoon stacks, trolleys, or splice joints.)
6’ Max. Support Centers,
3’ Max. Cantilever, Height (H) = 3-1/16”.
2) HOIST TROLLEYPart #RP-017G/SD
1000 lbs capacity. Trolley has both horizontal and vertical wheels for easy movement on unbalanced loads. Trolley weighs 11 lbs and is painted blue. One required for all track systems, two required on curved track systems.
(A)= 1-1/4", Length (B) = 14-5/8", Height (C) = 4-11/16"
3) PLAIN SUPPORT BRACKETPart #SP-026G
Hangers are painted blue.
Height (H) = Min. 6-1/4”
Weight 7 lbs
4) FLUSH MOUNT BRACKET - PARALLELPart #SP-026G/PLO
Used for PARALLEL mounting to I-beam, or PERPENDICULAR mounting to wood trusses. Brackets weigh 11 lbs and are painted blue. Includes beam clips and hardware for I-beam mounting.
Height (F) = 5-1/2”
5) FLUSH MOUNT BRACKET - PERPENDICULARPart #SP-026G/PRN
Used for PERPENDICULAR mounting to I-beam. Specifications same as parallel. On center hole distances same as #4, (parallel bracket).
Height (F) = 5-1/2”
6) END STOP BUMPERPart #RP-023G
Plastic bumper. Included hardware: 1/2” - 13 bolt, nut and lockwasher included with track orders.
7) FESTOON STACK SECTIONPart #RP-024G
Stores festoon trolleys or gliders without taking away from the available track length. Stack sections are painted blue.
(L) 19”, Weight 20 lbs.
Price includes attachment hardware and one bolt for end stop bumper. (shorter lengths available)
8) FESTOON GLIDERPart #RP-018G
Included. Plastic glider. One included for every 6 feet of runway.
A = 2” dia. F = 3-1/2”
9) FESTOON TOW TROLLEYPart #RP-018G/T
Recommended for use with curved track. One every 3’ on bridge or 6’ on runway.
10) SLOPED CEILING MOUNTEDHANGER ASSEMBLEYPart #RP-028G
Mounted to I-Beam. For plain steel track. Hangers are painted blue.
Height (H) Min. 11-3/8”
Weight 29 lbs.
Rods are 5/8” diameter. B7 Alloy-all thread.
11) SUSPEND HANGER ASSEMBLEYPart #RP-026G/S
Recommended for use when track is suspended from I-beam or wood truss. A = 5-1/16”, (no rod)
Weight 24 lbs.
12) CURVED TRACKPart #RP-016G
This is a one piece 90 degree angle curve.
Radius is 31’-3/8”, X = Length 45”, Weight 53 lbs.
13) SLICE JOINT (with hardware)Part #RP-020G
Needed to join monorail track if span is longer than 23 feet. B (maximum) 3-3/4”, D 8”, Weight 9 lbs.
A) Load BarPart #RP-037
Required for FREEDOM PIVOT™ on stationary machines or curved track systems.
38” x 2-1/2”
B) THREADED RODS (1/2" diameter)Part #SP-021
Fully threaded rods can be cut to any length: cutting charges apply. May be obtained locally.
C) METAL FRAMING CHANNELPart #SP-022
To be used when mounting track in the same direction as the ceiling joist. This channel is mounted at a right angle to the ceiling joist to disperse the weight load. Available in 10 foot sections. 12 Gauge - 1 5/8” x 3 1/4”. May be obtained locally.
D) JOIST CLAMPPart #SP-012
Height of clamp 7-3/4”. Size of joist 2”. Inside width 1-3/4”. Size of side bolt holes 7/16”. Bottom hole 9/16”. (Comes in extra wide when doubling wood trusses, internal dimensions is 3-3/4”) Weight: 2 lbs. for the Short Joist Clamp & 4 lbs. for the long joist clamp.
E) EXTRA WIDE JOIST CLAMPPart #SP-012EW
Height of clamp exterior 8". Height of clamp interior 7-3/4". Size of joist exterior width 4-3/10". Size of joist interior 3-3/4".
Size of side bolt holes 7/16". Bottom hole 9/16". Weight 3 lbs.
F) "U" CLAMPPart #SP-014
End holes 7/16” diameter: Centers hole 9/16” diameter. Drop 2-3/16”.
G) ANGLE IRONPart #SP-023
Recommended for sway brace use. 1/8” thick, 1-1/4” leg length. 1 lb. per foot. 6’ lengths.